1991-1995 Toyota MR2 Catalog
 
*****************************************************************************
ON SALE NOW:
High performance stock replacement brake rotors -
Most exhausts have discounted shipping rates! get the best price shipped
to your door!
GReddy turbo, intercooler, and blow off valve kits
NEW! - HKS 'reloaded' intake kits
- see below for more details
PROMO PRICING! - Berk DUAL MUFFLER
exhaust - see below for more details
SPECIAL MONTHLY OFFER:
HKS super blow off valve kit - new low price!
ACT & RPS high performance clutch kits - see below for details
*****************************************************************************
WE CARRY HUNDREDS OF MR2 PARTS AT SOME OF THE BEST PRICES YOU WILL FIND!
IT IS IMPOSSIBLE TO LIST EVERYTHING ONLINE, SO IF YOU DON'T SEE SOMETHING
LISTED, JUST ASK!
MOST LIKELY, WE CAN GET YOU THE PARTS AT A BETTER PRICE THAN THE COMPETITION.
YOU'LL BE GLAD YOU CHECKED WITH US FIRST!
Brake Components
Intake Components
A'PEXi Power Intake kit - 1991-95 Toyota MR2 turbo
 |
Your Turbo will sing with this
intake!!!
Unleash the performance potential of your MR2 with the most
cost effective upgrade available. The factory intake system
is designed to make sure small particles dont get into your
engine. However, the design of most factory intakes also chokes
the amount of air flow to the engine.
The APEXi Power Intake kit eliminates that restriction and
provides plenty of airflow resulting in added power and even
fuel effieciency. This unit is a direct bolt on. |
*actual kit for MR2 turbo displayed - click image for larger view
The unique Dual funnel filter system minimizes intake turbulence
for added performance. The Power Intake is a maintenance-free dry-type
air filter and will alleviate the problem of filter oil from "wet"
air cleaners interfering with the air-flow meter. Expect gains up
to 6 horsepower over the factory intake!
This intake system comes comes complete with everything you need
to replace the restrictive factory intake box and paper air filters.
Installs easily with basic hand tools.
|
Sale Price
$122.95
|
HKS 'reloaded ' Super Mega Flow intake kit
- 1991-95 Toyota MR2
|
Unleash the performance potential of your car with the most
cost effective upgrade available. The factory intake system
is designed to make sure small particles dont get into your
engine. However, the design of most factory intakes also chokes
the amount of air flow to the engine.
The HKS intake kit eliminates that restriction and provides
plenty of airflow resulting in added power and even fuel effieciency.
This unit is a direct bolt on. This intake system comes comes
complete with everything you need to replace the restrictive
factory intake box and paper air filters. Installs easily
with basic hand tools. |
The best part about installing this intake on your MR2 turbo is
the sound. You will clearly hear the turbo sing as it breathes more
freely directly behind the drivers compartment. NA owners will hear
the engine ROAR!
CARB approved - 50 state legal performance upgrade
|
Sale Price
all turbo
models
$139.95
1991-1/92
non-turbo
models
$139.95
|
BLITZ Intake kit - 1991-95 Toyota MR2 turbo
 |
The BLITZ® SUS Power air cleaners are made from top
quality T-304 stainless steel. Totally unique, the entire
filtration element is made from a fine stainless steel T-304
mesh (200 micron mesh and 150 micron crown). This mesh means
the filter will never wear out, and have substantially less
restriction than any other filter. Another feature is the
super fine pattern of the mesh. |
This straightens the airflow and dramatically reduces restrictive
turbulence. The BLITZ® air cleaners also have fine mesh at the
top of the filter, further improving the airflow capabilities. Unlike
anything available in the market today, the BLITZ® SUS Power
air cleaner is by far the best performing and best looking automotive
air filter money can buy, which include all the necessary pipe,
brackets, and adapters.
|
Sale Price
$179.00
|
K&N FIPK air induction kit - 1991-95 Toyota
MR2 turbo
 |
You cant go wrong with this trusted brand name. Expect some
nice gains in power as this will outflow your factory air
filter and let your engine breathe!
The K&N FIPK (Filtercharger Injection Performance Kit)
is a 50 state legal Air Filter. The unit replaces your stock
air box and replaces it with a cone filter by K&N that
offers both increased performance and a million mile life.
|
|
Sale Price
$154.95
|
Exhaust Components -
*EXTRA LOW SHIPPING RATES ON EXHAUSTS FOR A LIMITED TIME!
pay only $17.99 for ground shipping on most exhaust systems
HOT NEW ITEM
!!! - hurry! only a limited supply available!
Berk DUAL catback exhaust system - 1991-95 Toyota MR2 Turbo
| With the perfect blend of performance & styling, this
exhaust delivers huge power gains on any MR2 turbo. The large
diameter piping and straight through mufflers will provide
plenty of flow for even the largest of turbo upgrades. This
is the best all around exhaust system we offer. Also, install
is a snap thanks to the well engineered position of the B-Pipe. |
*actual MR2 turbo exhaust system displayed |
If you're a fan of the GReddy Power Extreme, you'll love
this system.
This is a much higher quality exhaust and at a better price!
notable features:
- Fully polished 304 Stainless Steel construction
- Dual canister muffler bodies
- Dual layered muffler packing to eliminate unwanted resonance
- Stainless steel wool & high density glass packing for
maximum sound control
- Straight through perforated muffler core
- Full 3 inch(76.2mm) piping from downpipe back
- Hand made 3” merge collector
|
(click image for larger installed view) |
- ½” Thick flanges for a warp free, leak free seal
- 4” Slash cut single wall exhaust tips
- 3” B-pipe stainless steel braided flex section
LIMITED
TIME OFFER!
Manufacturer authorized - ECONOMIC STIMULUS SALE!
limited to stock on hand - huge savings off MSRP
|
SUPER
SPECIAL
Sale Price
$549.99
price includes
ground
shipping!
limited
time offer!
|
BERK downpipe upgrade - 1991-95
Toyota MR2 Turbo
*actual MR2 turbo downpipe displayed
|
Berk 2nd generation downpipe
fits all 1990-95 USDM MR2 Turbo models
also fits 1990-early 93 JDM MR2 turbo models
|
features:
•Full 3" Downpipe w/ Integrated Flex Section.
•Full Bellmouthed Wastegate section. Large bellmouth portion
never before seen on the MR2. Allows full actuation of the wastegate
flapper and extremely low backpressure on the turbine wheel. Flows
BETTER than divorced wastegate setups.
• Integrated stainless steel braided and interlock lined flex
section to ELIMINATE cracking problems associated with 3SGTE downpipes.
Another MR2 first by Berk Technology.
• Full 304 stainless steel piping & flanges.
• Thick walled 0.065” 304 SS tubing.
• This downpipe will OUTFLOW and OUTPERFORM any and all 2.5”
downpipes. No if’s ands or butts! This has been proven in countless
tests.
• Includes gasket, 304 stainless downpipe support bracket,
& nuts/bolts.
• World class quality and fitment that you’ve come to
expect from Berk.
Do not be fooled by those cheap downpipes that always crack and
cause exhaust leaks. Berk has designed this pipe to be ULTRA STRONG
with high quality materials with deep solid welds. The thermal flex
section provides an extra margin of safety to allow absorb any additional
stress. You get a top quality part that delivers the best bang for
your buck. Hands down the best downpipe on the market & you
can't beat this price!
(JDM GEN 3 version now available - please
e-mail for availability)
All US spec MR2's will use the Gen 2 version listed above. if you
have a 3rd gen 3SGTE swap, let us know and we can get you setup
as well.
|
Sale Price
standard
downpipe
$199.95
downpipe
with
optional
O2 bung
$219.95
|
A'PEXi GT SPEC catback exhaust system
- 1991-95 Toyota MR2 Turbo
*actual MR2 turbo exhaust system displayed
GT Spec Mufflers are the flagship line of APEX exhaust systems.
These race-bred exhaust systems were engineered to handle extremely
high-horsepower applications. - off road use only
features: 75-80-95mm mandrel bent piping - 115mm exhaust tip
|
Sale Price
$599.95
|
A'PEXi N1 EVO catback exhaust system
-
1991-95 Toyota MR2 Turbo (NEW part # 161AKT02)
|
Inspired by the Japanese N1 Endurance series, the APEXi
N1 exhaust systems are designed with a minimal number of bends
for maximum efficiency. This keeps exhaust flowing at higher
RPM's for maximum power output. These race-bred exhaust systems
were engineered to handle extremely high-horsepower applications.
features:
75-85mm mandrel bent piping
115mm exhaust tip
|
|
Sale Price
$589.95
|
RS*R GT2 raceline catback exhaust
system
- click
here for actual image of RSR system installed on MR2 turbo
The ultimate in exhaust performance is the GT2 series. This exhaust
has the look and performance of true racecars. This is the exhaust
system that will plenty of flow for your high horsepower turbocharged
MR2.
RSR LOW PRICE GUARANTEE! - we will meet or beat any advertised price
on RSR!
MR2 GT2 exhaust features: 60-70-80mm mandrel bent ceramic coated
piping, includes flex section for durability and long life , single
exit muffler canister for light weight, full polished 304 stainless
steel muffler, optional silencer included
|
Sale Price
sorry
sold out
available
by
special
order
from Japan |
HKS Turbo catback exhaust system
- 1991-95 MR2 Turbo
|
Searching for a great looking dual tip exhaust for your
MR2? Well look no further. The HKS TURBO is a great street
legal exhaust for the 2nd generation MR2. This exhaust provides
a nice deep tone with great looking HKS original signature
exhaust tips. Expect nice gains in horsepower and torque without
all the noise!
part # LET-T07
|
|
Sale Price
$499.00
|
HKS Hiper catback exhaust system
- 1991-95 MR2 turbo
This is the best selling exhaust we offer for the Toyota MR2
turbo.
All HKS exhaust systems are engineered for high-performance
and durability. Each bolt-on system features high-quality
mandrel bent, bake-coated aluminized steel piping and application
specific muffler assemblies to maximize horsepower and torque
gains. more
This system completely replaces your factory system from the
main cat back.
features:
75mm piping with a 120mm tip. Inspired by & designed from
the N-1 Endurance Race series in Japan. Stainless steel muffler
with ceramic coated piping. |
- actual 91+ MR2 system shown
- click image for larger view
|
|
Sale Price
$499.00
|
GReddy SP catback exhaust system
- 1991-95 Toyota MR2 Turbo
features:
60mm piping with dual exit 110mm flared rolled edge exhaust
tips. High quality GReddy exhaust from Japan designed specifically
for the MR2. Expect a nice gain in horsepower with a great
exhaust note.
|
*click on image for larger view |
highly recommended street performance exhaust system!
GReddy Power Extreme also discontinued
|
sorry
sold out |
BLITZ Nurspec exhaust system -
1991-95 MR2 turbo
* actual MR2 system displayed
- click image for installed view |
The BLITZ® NÜR - Spec Series exhausts are available
as direct bolt-on replacements for OEM exhaust systems. BLITZ
exhausts reduce back pressure and thermal stress. This allows
the engine to create more power and torque by breathing easier.
By utilizing extensive computer controlled design, flow analysis,
dyno testing, and precise fitment BLITZ® mufflers produce
maximum horsepower without dramatically reducing low-end torque.
The single exit design provides maximum power output for the
2nd generation MR2. |
* this exhaust ships in a extra large box. additional shipping fees
may apply.
|
Sale Price
$749.95
|
BLITZ (cat-delete) downpipe - power up!
 |
Off-road use only. Replaces the main catalytic convertor on
1991-95 MR2 turbo with an open free flowing element. Expect
significant gains in both horsepower and torque by opening
up your exhaust flow. Direct bolt on application for factory
CT26 turbocharger. Installs easily with basic handtools.
SORRY SOLD OUT & DISCONTINUED
This is really an outdated design so it has been discontinued.
The new BERK downpipe is the latest in MR2 downpipe technology.
It outflows this unit hands down. check it out above |
- click on image
for larger view of actual MR2 downpipe
|
Sale Price
sorry
sold out
check out
the BERK! |
Tanabe (B pipe) downpipe - power up!
features: full 304 stainless steel construction!
-
click on image for larger view of actual MR2 downpipe
|
This ultra high quality piece replaces the restrictive factory
B-pipe with a larger mandrel bent high flow unit.
this is a perfect compliment to many of the axle back MR2
systems we offer.
Expect a nice gains in both horsepower and torque by opening
up your exhaust flow. Direct bolt on application for all 1991-95
MR2 turbos. Installs easily with basic handtools.
|
* due to the size of this package, there will be additional shipping
charges according to your zip code. please email sales@turboimport.com
in advance for a shipping quote.
|
Sale Price
$304.95
note:
additional
shipping
fees for this
item |
*EXTRA LOW SHIPPING RATES ON EXHAUSTS FOR A LIMITED TIME!
pay only $17.99 for ground shipping on most exhaust systems
Suspension Components
TEIN Basic coilover suspension kit - 1991-99 Toyota MR2 -
all models
|
Tein offers a quality product at an excellent price point.
Why both just replacing your old shocks, when you can have
a full coilover setup for only a few hundred dollars more.
This TEIN Basic kit is for ride height adjustment only and
does not include dampening adjustments. This means one setting
for ride comfort. (not adjustable for soft to hard settings).
If you just want a solid spring and shock combo that gives
you the flexibility to set your ride height, this kit is
the best bang for the buck. Nothing comes close to this
price.
|
note: must be used with oem toyota shock mounts. Does not work with
the TEIN pillow ball upper mounts.
features:
• Steel Construction / • Twin Tube internal construction
• Larger piston diameter for strut type front and rear (22mm)
• Ride Height adjustable via spring seat
• Powder coated damper body with Zinc coated threaded section
• 1-year Manufacturers Defect Warranty / • Available for
Overhaul
Spring rates:
Front: 4.0 kg/mm / 224 lbs/in - - Rear: 8.0 kg/mm / 448 lbs/in
|
Sale Price
$1139.95
|
TEIN SS -
Super Street coilover kit
The Tein Super Street Coilovers are the newest street coilover
available for your MR2. This setups allows you to adjust ride
height and 16 levels of damping force. The sale price does
not include the optional pillow ball mounts. A full set of
optional mounts are available at additional cost. The SS is
also EDFC compatible so you can adjust dampening from inside
the car while driving. |
 |
SS spring rates: Front: 4.0 kg/mm / 224 lbs/in - Rear: 8.0
kg/mm / 448 lbs/in
features:
• Steel Construction / • Twin Tube internal construction
• 16 way adjustable dampers, compression and rebound combined
• Ride Height adjustable via spring seat
• Larger piston diameter for strut type front and rear (22mm)
• Powder coated damper body with Zinc coated threaded section
• 1-year Manufacturers Defect Warranty / • Available for
Overhaul
full TEIN line also available so please ask if you dont see something
listed
|
Sale Price
$1349.95
|
TEIN FLEX coilover kit
The TEIN FLEX damper kit was designed to provide driving comfort
and sports performance with its full-length adjustment system.
Tein incorporated separate height and preload adjustments,
which allows you to have various set-ups to meet different
road conditions. |
 |
The FLEX Damper kit includes pillow ball upper mounts and is compatible
with the EDFC (cockpit mounted soft/hard setting controller) , for
maximum performance for the streets.
FLEX spring rates: Front: 4.0 kg/mm / 224 lbs/in - Rear:
8.0 kg/mm / 448 lbs/in
features:
• Steel Construction / • Twin Tube internal construction
• Ride Height adjustable via threaded body and spring seats
• 16 way adjustable dampers, compression and rebound combined
• Pillow ball upper mounts for increased steering feel
• Upper camber adjustment on front for strut type vehicles
• Larger piston diameter for strut type front and rear (22mm)
• EDFC (Electronic Damping Force Controller) compatible
• Powder coated brackets with Teflon coated shock body for
heavy duty rust prevention / • 1-year Manufacturers Defect
Warranty
|
Sale Price
$1749.95
|
TEIN S tech lowering springs
TEIN S.Tech Springs offer approximately a 1.5 inch drop for
a more aggressive appearance and increased road holding capability.
Designed to be used with OEM or OEM replacement shocks. |
 |
• Chrome Vanadium SAE9254V Construction
• Progressive Spring Rate Design / • Green Powder Coat
Finish
• Developed to be used in conjunction with OEM or OEM replacement
dampers
spring rates:
front - 2.75kgf/mm - 154 lbs/in ----- rear - 4.9kgf/mm - 274 lbs/in
|
Sale Price
$214.95
|
Eibach Pro Kit lowering springs -
1991-95 Toyota MR2
 |
The Pro-Kit is Eibach's premium suspension product and is
considered to be one of the world's top performance suspension
products. The performance and reliability has been proven
in millions of Pro-Kit spring sets sold in all five continents
and in over more than 40 countries around the world.
approximate drop:
1.0 inch front, 1.0 inch rear |
|
Sale Price!
$239.00
|
Tanabe Grip Feeling SUSTEC GF210 lowering springs
1991-95 Toyota MR2 - part # TGF019
 |
Geared for performance, trace your favorite racing line
with the performance-oriented GF210 series springs. The ultra
light-weight, ultra durable, ultra precise 210 series springs
are created through Tanabe's newly developed shot-peen technology
and state-of-the art German machinery.
approximate drop: Front 1.0 inch, Rear 1.0 inch
spring rates: Front 2.3, Rear 4.1 (metric) |
|
Sale Price!
$169.95
|
Tanabe SUSTEC Stabilizer bars - 1991-95 Toyota MR2 all models
 |
This is an excellent cost effective alternative to the TRD
sway bars. Corner flatter and faster with the TANABE larger
diameter sway bars. Engineered for precise fitment. You will
notive increased roll resistance and cornering stability without
the compromise of ride comfort. Fine-tune your suspension
easily without even changing spring rates. This is an inexpensive
upgrade for MR2 owners looking for the next level in handling.
bar tubing size diameter:
front = 30.4 mm
rear = 27.5 mm |
Tanabe Chassis Under Brace -fits all 1991-95 Toyota MR2 models
* actual MR2 brace displayed
click image for larger view |
All vehicles experience flexing of the unibody under various
handling loads. Twisting of the chassis is also very common
on higher horsepower vehicles.
The SUSTEC UNDERBRACE prevents this unwanted behaviour by
connecting specific points of the undercarriage to reinforce
the chassis. Unique internal double-i-beam construction is
highly rigid, and lightweight, so the chassis may be significantly
reinforced without adding surplus weight. Noticeable gains
in balance and stability are gained after it's simple bolt
on installation.
|
|
Sale Price
front bar
$194.00
rear bar
$194.00
Under Brace
$197.99
|
 |
RS-R is the # 1 manufacturer of high performance spring
kits in the Japanese aftermarket. Enthusiasts in Japan choose
RS-R springs over the competition for many reasons. With over
20 years of experience in Japanese suspension tuning, the
RS-R development team ensures that every spring kit provides
maximum performance for each application. |
RS*R Down SUS lowering springs
approximate drop: Front 0.8, rear 1.0 - spring rates: Front 3.15,
Rear 5.0 (metric)
RS*R "RACE" Springs - (higher
spring rate)
approximate drop: Front 0.8, rear 1.0 - spring rates: Front
3.6, Rear 6.2 (metric)
|
Sale Price
down sus
$249.00
race springs
$249.00
|
TEIN Strut Tower bars
 |
TEIN aluminum Performance Bars are produced in two designs,
round and oval. By using A6000 aluminum TEIN has been able
to produce bars, which are not only lightweight but are also
exceptionally rigid. The twist and flex that occurs in performance
driving is reduced, therefore allowing the driver to obtain
the full potential of the suspension. Features include green
anodized mounting plates, polished aluminum bar, and EDFC
compatibility. |
• Specifically tested for each application
• A6000 Aluminum Construction
• Oval type features a two column design for increased rigidity
• Round type feature turnbuckle ends
• Anodized mounting plates
• EDFC compatible / • 3-piece design for ease of installation
and removal
|
Sale Price
front bar
$142.99
rear bar
$132.99
|
Tanabe Strut tower bars
|
The strut tower bar is arguable one of the least expensive
upgrades that can provide a very high degree of benefit that
is felt immediately after installing. |
The strut tower brace improves handling and stability of a vehicle.
By connecting the strut towers, and creating a balance, the shocks
are prevented from independently moving and causing small changes
in suspension geometry. While simple in appearance, the Tanabe design
of the bar's centershaft has a significant amount of engineering
built in. The construction is reinforced extruded aluminum, which
features dual reinforced lips on the underside, as well as tapered
ends for additional rigidity. The hollow centershaft is very lightweight,
so weight is not added to reinforce the chassis.
 |
* actual MR2 strut bars displayed
- click image for larger view |
|
Sale Price
front bar
$117.99
rear bar
$117.99
|
features: Adjustable Preload
It is always recommended to raise the vehicle when installing so that
the load of the shock uppermounts on the shock towers is relieved and
balanced out. When raised, and the tower bar is placed onto the vehicle,
the preload can be adjusted and set. After it is bolted on and the car
is lowered, each shock tower will have equal load and will prevent independent
movements of each shock. This will provide an extremely noticeable difference
after installing. If a tower bar is installed on a car that is not raised,
these great benefits will be missed.
Top Quality and Finish
You can't really see it in these pics, but these bars are GREAT LOOKING
in person. The anodized finish is great and the end plates are 100% steel
for maximum strength and durability. Beware of cheap imitations, which
are highly subject to deformity and breaking. Tanabe's 100% steel end
plates are engineered for durability, so that the stress properly transfers
to the bar, and does not overstress the welds and mounting brackets.
Turbos, Intercoolers, Blow Off Valves, etc...
GReddy TD06 20G Turbo Kit & T67 & T78
*TD06SH-20G kit shown above
- excellent choice to replace your old toyota turbo! easily replaces
the stock turbo and makes a little more power. no other upgrades
required. this will work with your stock ECU at the factory boost
setting.
note: these kits are for offroad use only.
The TD06 kit is the best bang for the buck turbo kit for the MR2
Turbo. It comes complete with everything you need to replace your
worn out factory CT26 turbo. This turbo will easily make over 350
RWHP with proper tuning. Includes all necessary hardware for easy
install. We recommend supporting modifications such as fuel system,
intercooler, and ECU upgrade when upgrading your turbocharger.
want BIG power?
check out the full turbo upgrade kits below:
NEW! TD06S L2 20G kit - quick spool with a greddy tubular manifold!
T67 and T78 Turbo Kits also available. Please e-mail sales@turboimport.com
for more details on these larger turbochargers. Extensive modifications
such as fuel system upgrades and engine management required to take
advantage of these larger turbo kits for the MR2.
* click here
for an image of the T67 turbo kit.
T78 kit nearly identical to what is shown in the T67 kit
|
SPECIAL
Sale Price
TD06SH-20G
$2029.95
TD06S L2
20G
$3499.95
T67
$3759.95
T78
$4319.95
|
GReddy stock mount intercooler upgrade
- 1991-95 Toyota MR2 Turbo
Get rid of the wimpy restrictive factory intercooler.
The GReddy intercooler upgrade is much thicker and will allow
you to enjoy higher boost levels without having to worry about
the intercooler immediately getting heatsoaked.
comes complete with all new hoses, adaptor elbow pipes,
and heat shield for 100% bolt on installation. easily installs
with basic hand tools |
- actual MR2 intercooler shown.
click image for larger view |
LIMITED TIME OFFER! WONT LAST!!!
|
SPECIAL
Sale Price
$939.95
|
HKS stock mount intercooler upgrade - 1991-95 Toyota MR2 Turbo
The factory Toyota intercooler for the MR2 quickly becomes a
bottle neck at higher boost levels. We recommend that you replace
the restrictive factory intercooler with the proven HKS drop in
replacement. The HKS intercooler upgrade is a much more efficient
unit and comes complete with all installation hardware. The core
is much larger and will allow you to enjoy higher boost levels without
having to worry about the intercooler immediately getting heatsoaked.
measures: 200mm x 314mm x 65mm
please choose the correct version that matches your MR2 production
date.
|
Sale Price
90-9/93
models
$899.00
10/93-1995
models
$899.00
|
Berk Bar & Plate intercooker kit
with Spal Fan & shroud
* click image for larger view |
Get aerospace & defense technology in your MR2! This
bar & plate intercooler kit has been proven to out perform
other stock mount intercooler kits due to the efficient core
design.
This kit comes with everything you need for easy bolt on installation.
The black anodized core features a high cooling design. Black
intercooler pipes, & fan shroud provide a stealthly look
in the engine bay. Also, the unique black surface allows greater
heat transfer vs. bare aluminum surfaces. |
notable features:
Dense Fin Design, 33% more Fins Per Square Inch (FPI) than Greddy
large core - measures: 244x193x103mm
Polished 6061 Aluminum Tubing (will not heat soak like steel)
SPAL 7.5" Intercooler Fan upgrade included (not shown
in above)
ultra high quality SAE J20 spec 3 ply silicone couplers
100% bolt on, no cutting, hacking, etc.
Awesome value & HIGHLY RECOMMENDED!
|
Sale Price
$499.00
please
check
availability
before
placing
order |
 |
APEXi Blow Off Valve Kit - 1991-95 Toyota MR2 Turbo
Older factory compressor bypass valves may leak when increases
boost levels on the MR2. You can easily eliminate this power
robbing issue by adding the APEXi blow off valve kit which
completely replaces the factory valve and adds a great whoosh
sound! Comes complete with everything you need for a easy
install.
|
|
SPECIAL
Sale Price
$177.95
|
BLITZ blow off valve kit - 1991-95 Toyota MR2 turbo - part #
70047
 |
Save your turbo and sound cool in the process! BLITZ Blowoff
Valves relieve compressor surge without reducing compressor
speed. It controls boost pressure that is built up by the
turbo and vents it into the atmosphere when the car is not
under load (in between shifts) making that great WHOOSH sound
we all love. This prevents pressure from backing up into the
compressor housing, causing the turbo impeller blade to rapidly
stop or even worse, to spin backwards (compressor surge or
backspin). |
|
Sale Price
$264.00
|
|
HKS super sequential blow off valve kit
Replace your stock compressor bypass valve with this great
sounding blow off valve kit from HKS! The newest version of
the SSBOV is made of billet aluminum & lets out a great
whistling sound when it relieves pressure. The HKS Super Sequential
Blowoff Valve (SSQV) is a dual stage pull type relief valve.
Unlike other blow off valves that are push type, the SSQV
will not leak under high boost conditions nor under vacuum
at idle.
This Toyota MR2 specific kit comes complete with everything
needed for easy install with basic hand tools. |
ALL NEW REDESIGNED VERSION!
|
SPECIAL
Sale Price
$247.95
|
Drivetrain Components - clutch kits and flywheels
BLITZ Active Clutch Kit - 1991-95 MR2 Turbo - 3SGTE engine
The BLITZ® Active Clutch was designed to hold maximum horsepower
while retaining daily drivability. The Active Clutch is a complete
clutch assembly that includes flywheel, pressure plate, clutch disc,
and all necessary hardware. BLITZ clutch systems weigh an average
of 15%-20% lighter then stock. The unique feature of the BLITZ Active
Clutch is the ability of change the clutch from a single disc clutch
to a twin disc clutch. This allows the user to choose the correct
clutch according to the power of the vehicle.
|
Sale Price
single
disk
$819.95
|
ACT High Performance Clutch Kits
 |
Advanced Clutch Technology
In our opinion, ACT offers the best clutch upgrade options
for most daily driven MR2's.
There are a wide variety of clutch kits to choose from. The
"street" kit will be the most user friendly and
feel like a stock clutch and highly recommended for most MR2
owners.
If you are making a ton of horsepower and hit the racetrack
from time to time, we have other options available. A few
of the most popular kits are listed below:
|
STREET CLUTCH - TM1-HDMM - includes these components:
T-010 - Heavy Duty Pressure Plate, TYSD018M - Modified Disc
RB446 - Release Bearing, AT72 - Alignment Tool - Torque Capacity:
383 ft/lbs.
note: best seller. easy to drive and feels close to stock and provides
smooth engagement while holding more power.
4 PUCK RACE CLUTCH - TM1-HDR4 - includes:
T-010 - Heavy Duty Pressure Plate, 4P236G - 4 Pad Race Disc
RB446 - Release Bearing, AT72 - Alignment Tool - Torque Capacity:
490 ft/lbs.
6 PUCK RACE CLUTCH - TM1-HDR6 - includes:
T-010 - Heavy Duty Pressure Plate, 6P236G - 6 Pad Race Disc
RB446 - Release Bearing, AT72 - Alignment Tool - Torque Capacity:
490 ft/lbs.
note: great holding power but more difficult to drive since it is
more grabby.
SPRUNG 6 PUCK CLUTCH - TM1-HDG6 -
same as above kit, but with a sprung disc fr smoother engagement.
Other popular combinations available. Please refer to the clutch
catalog if you require a specific pressure plate and flywheel
combination.
Complete Clutch kits include ACT pressure plate, ACT street disc,
ACT throw out bearing, and ACT Clutch Alignment Tool.
|
Sale Price
*SPECIAL*
Street Kit
TM1-HDMM
$339.95
4 puck
TM1-HDR4
$339.95
6 puck
TM1-HDR6
$349.95
sprung
6 puck
TM1-HDG6
$384.95
|
Fidanza Lightweight Aluminum Flywheel -
 |
1991-95 Toyota MR2 turbo - 3SGTE engine
A lighter flywheel will reduce the rotational mass on your
crankshaft allowing your engine to rev up more quickly. Fidanza
lightweight flywheels are made from 6061 T6 aluminum for strength
and great weight savings over the stock flywheel. The friction
surface is 1050 high carbon alloy steel which allows the use
of about any clutch material. Great for you road race enthusiasts! |
|
Sale Price
$299.00
|
B&M short throw shifter- fits all 1991-95 MR2 models
 |
B&M Short Throw Shifters offer a dramatic improvement
in shifting performance due in large part to reduced shifter
travel, or "shift throw". Shift throw refers directly
to actual physical travel of the shifter stick - thus affecting
the time it takes to shift from one gear to another. In
a performance situation, the additional seconds (or fractions
of a second) a factory stock shifter takes to go from one
gear to another can result in slower elapsed times - or
just a sluggish feeling when driving around town. A B&M
Short Throw Shifter eliminates that sluggish feeling in
a daily driver, and gives the racer an extra edge.
|
|
Sale Price
$144.95
|
 |
RPS turbo clutch kits also available at a great price.
featured item: RPS SPORT STREET KIT
This kit offers additional holding capacity over your stock
clutch with smooth engagement. You cant beat this great price
for a high performance MR2 clutch kit.
holding capacity 324 ft/lbs |
We also offer the RPS MAXX clutch kit for your big horsepower guys.
The MAXX kit holds 450 ft/lbs and still offers smooth engagement
since it uses a street disc with a stronger pressure plate. Requires
a little more pedal effort so keep that left leg in shape!
|
Sale Price
sport street
clutch kit
$289.95
MAXX kit
$374.95
|
Engine, Ignition, and Fuel Components
|
