2000+ Toyota MR2 Spyder Catalog
Brake Components
|
COOLROTORS Dimple Drilled & Slotted Brake Rotors
These rotors are one of the best selling parts here! They offer
great performance & value so you should really take a good
look at these if your brakes are worn out! Your factory braking
system provides great braking performance but there is always
room for improvement. COOLROTORS are a DIRECT REPLACEMENT for
the your original rotors. There is no need to modify your factory
braking system & installation is simply Plug and Play
These rotors are designed to enhance your stock braking system.
The dimples and slots literally help keep the brakes COOL and
keep your car from experiencing premature brake fade.
We HIGHLY recommend these over other cross drilled rotors you
may find out there. The dimpled design is much stronger than full
drilled rotors that have a tendency to develop stress cracks.
Also, COOLROTORS slots have nice smooth beveled edges that will
help avoid premature pad wear that other slotted rotors may cause.
As an added bonus, all rotors are Zinc coated to protect your
rotors from ugly rust. We have found these rotors to provide the
best of both designs while looking very COOL at the same time.
HIGHLY RECOMMMENDED!
save more on brake rotors and shipping when purchasing a full
set of rotors!
|
Sale Price
all MR2
spyder
models
Full set
front & rear
$249.00
Front Pair
$135.00
Rear Pair
$130.00
|
Intake Components
A'PEXi Power Intake kit - Toyota MR2 spyder
 |
Unleash the performance potential of your engine with the
most cost effective upgrade available. The factory intake
system is designed to make sure small particles dont get into
your engine. However, the design of most factory intakes also
chokes the amount of air flow to the engine. |
The APEXi Power Intake kit eliminates that restriction and provides
plenty of airflow resulting in added power and even fuel effieciency.
This unit is a direct bolt on. The unique Dual funnel filter system
minimizes intake turbulence for added performance. The Power Intake
is a maintenance-free dry-type air filter and will alleviate the
problem of filter oil from "wet" air cleaners interfering
with the mass air-flow meter. Expect significant gains in horsepower
over the factory intake!
|
Sale Price
$144.95
|
HKS Reloaded Racing Suction Intake
2000+ Toyota MR2 Spyder
|
This is the newest intake system available from
HKS. See big gains in horsepower over the restrictive stock
air filter system with this 50 state street legal replacement
upgrade.
HKS Racing Suction Kits are limited versions of Super Mega
Flow intakes that come with polished aluminum piping and signature
yellow SMF filter elements. These kit offer greater airflow
and show quality looks from the less restrictive polished
aluminum pipes. |
Included in each kit is HKS' Reloaded filter with its patented Super-Funnel
and new technical advances:
- Filter cage allows for 30% more intake surface area
- Aluminum back plate for added strength
- Sealing ring reduces contaminants from entering engine
- Dual Density wet filter element
|
Sale Price
$295.95
|
BLITZ SUS Power Intake kit - 2000+ Toyota MR2
Spyder
 |
The BLITZ® SUS Power air cleaners are made from top
quality T-304 stainless steel. Totally unique, the entire
filtration element is made from a fine stainless steel T-304
mesh (200 micron mesh and 150 micron crown). This mesh means
the filter will never wear out, and have substantially less
restriction than any other filter. Another feature is the
super fine pattern of the mesh. This straightens the airflow
and dramatically reduces restrictive turbulence. |
The BLITZ® air cleaners also have fine mesh at the top of the
filter, further improving the airflow capabilities. Unlike anything
available in the market today, the BLITZ® SUS Power air cleaner
is by far the best performing and best looking automotive air filter
money can buy, which include all the necessary pipe, brackets, and
adapters.
|
Sale Price
$199.00
|
BLITZ LM SUS intake kit - 2000+ Toyota MR2
Spyder
 |
The BLITZ LM Intake System was designed to reduce intake
restriction and provide maximum filtration. The LM intake
system was design to filter without any assistance of oil.
(Oil can gradually disperse into the inlet tracks and coat
walls of the air flow meter which can slowly reduce the performance
of your vehicle.) The LM system was also design with a replaceable
filter element. Unlike any other conventional one piece filter,
the LM intakes filter element can be replaced at any time.
|
|
Sale Price
$139.00
|
Exhaust Components
Suspension Components
Tanabe Grip Feeling SUSTEC GF210 lowering springs
2000+ Toyota MR2 Spyder - part # TGF039
 |
Geared for performance, trace your favorite racing line
with the performance-oriented GF210 series springs. The ultra
light-weight, ultra durable, ultra precise 210 series springs
are created through Tanabe's newly developed shot-peen technology
and state-of-the art German machinery. |
approximate drop: Front 1.2 inch, Rear 1.2 inch
spring rates: Front 2.2, Rear 2.5 (metric)
|
Sale Price!
$169.00
|
RS*R Down SUS lowering springs - 2000+ Toyota MR2 Spyder
 |
RS-R is the # 1 manufacturer of high performance spring
kits in the Japanese aftermarket. Enthusiasts in Japan choose
RS-R springs over the competition for many reasons. With over
20 years of experience in Japanese suspension tuning, the
RS-R development team ensures that every spring kit provides
maximum performance for each application.
|
approximate drop: Front 1.2, rear 1.0
spring rates: Front 1.69, Rear 2.74 (metric)
RSR LOW PRICE GUARANTEE! - we will meet
or beat any advertised price on RSR!
|
Sale Price
too low to
list! ask
|
Engine, Drivetrain, Ignition, and Fuel Components
BLITZ Active Clutch Kit - 2000+ MR2 Spyder
The BLITZ® Active Clutch was designed to hold maximum horsepower
while retaining daily drivability. The Active Clutch is a complete
clutch assembly that includes flywheel, pressure plate, clutch disc,
and all necessary hardware. BLITZ clutch systems weigh an average
of 15%-20% lighter then stock. The unique feature of the BLITZ Active
Clutch is the ability of change the clutch from a single disc clutch
to a twin disc clutch. This allows the user to choose the correct
clutch according to the power of the vehicle.
|
Sale Price
single
disk
$819.95
|
 
We carry a full line of high performance clutch and drivetrain components
for your MR2 Spyder. There is simply too much to list so if you
can't find something just ask us.
please see the Clutch & Flywheel Components page for a complete
listing of drivetrain parts
|
|
Toyota Supra Turbo OEM Fuel Pump
part # 23221-46110
Approximate Flow Rates:
260 lph @43psi @12v
220 lph @58psi @12v
290 lph @43psi @14v
260 lph @58psi @14v
Most MR2's will run out of fuel when surpassing the 300 RWHP
range. We recommend a complete fuel system upgrade at this point.
We offer complete fuel system upgrades including fuel rail, injectors,
regulator, additonal pump, and stainless steel braided lines.
However, we offer this high flow fuel pump at a discount price for
you "do it yourselfers" that are capable of building your
own fuel system.
This pump is also an excellent drop replacement upgrade pump for
all other imports such as RX-7, Eclipse, MR2, EVO, etc... Slight
modification to fuel pump wiring harness may be requireed for your
specific application.
|
Sale Price
$199.00
pump only
$207.00
pump with
white strainer
filter base
|
Electronics - Gauges, Boost Controllers, Turbo Timers & other electronics
Nitrous Oxide Injection
many more additional MR2 parts available! Please e-mail sales@turboimport.com
for parts inquiries and price quotes.
Many other parts are also available so dont forget
to see more parts for your car in the Manufacturer catalog on our website.
go back to the main catalog page for a full list of manufacturers &
parts or just follow some of these quick links....
|
|
